Single-Family

Ashley Ave - 2

Stability Engineering provided design and CAD services to produce construction documents for this modern house. Design challenges included frameless corners at exterior walls, a sleeper first floor system for mechanical equipment run above the slab on grade...

Barksdale Drive

Stability Engineering provided engineering consultation for a new 4000 square foot, two-story single-family residence over full basement. The home is wood-framed with brick veneer, concrete basement walls, and custom spiral staircase. Stability Engineering also provided design and consultation for a rear cantilevered parking pad and bonus room with...

Beverly Road

The design of this single-family residence utilizes the steel and SIP (Structural Insulated Panel) System designed by Stability Engineering as an alternate to total wood framing. The custom, proprietary structural system offers superior structural capacity, open floor plan, and built-in thermal barrier, resulting in lower construction costs and high levels of energy conservation.

Cherry Hill

Provided engineering for new second floor addition with modifications to the first floor and basement, including engineering to stabilize existing basement wall.

East Avenue

New contemporary 2 story wood framed residence, with cantilevered floors, roof deck and steel stairs.

Emerson Avenue

Renovation of this 1920s craftsman-style home included additions to the first and second floors and a new 2-car attached garage on the back. The first floor additions included a new enlarged kitchen and a new interior stairway to the second floor. The second floor expanded from a 1-bedroom apartment with exterior stairs to three bedrooms, two baths, and...

Greystone Road

Provided structural design for reframing home for repair of fire damage and new renovation.

Jett Road

Stability provided engineering and full structural construction drawings for new 2-story wood-framed residence with basement, attic storage, and a new 2-car garage with storage above. The house is built into the side of a hill with grade changes...

Lakeshore Drive

Residential renovation with enclosed rear screened porch and deck. Design included steel-framed extension of existing cantilevered concrete slab with wood-framed walls & roof above; new driveway retaining wall and building foundation walls; and new rear wood deck with upper floor room enclosure.

Little John

Provided structural engineering and design for 5350 s.f. steel & wood framed modern residence with Plexus Architecture. Structural features include 2-story volume living room with extensive glass surfaces, cantilevered concrete floor slabs, and ‘floating’ cantilevered upper floor bedroom.

Mead Road

New contemporary residence. The most interesting structural aspect of this project was accommodating the owner’s design, which included both interior and exterior exposed concrete walls. Our design consists of 4” exterior and 4” interior concrete, with 4” of rigid foam insulation sandwiched in the middle. The two layers of 4” concrete each have...

Mimosa Drive

Stability Engineering provided structural design and construction oversight for a single-family rear addition with screened porch.

Nimmons Street

Stability provided engineering for this historic home renovation including a 3-car garage addition with master bedroom suite above, featuring a custom vaulted ceiling roofline with a cupola at the peak. The renovation also included rebuilt dormer windows and conversion of the attic into an art studio with large skylights. Design of the garage included...

Oakdale Road

Residential 2-story rear addition and new underground garage with terrace above. Structural design included pre-cast elevated slab to span over garage.

Paces Forest Dr

Provided structural design and engineering for new 2-story addition, including new rear concrete patio and screened porch, foundation walls, and tie-in to existing house.

Pembroke Place

Stability provided design and engineering for this newly constructed 7000sf single-family home with slab on grade basement, two floors (main floor containing a large, open kitchen), and a finished attic. This is a Mediterranean style home framed in wood; exterior walls consist of 2x6 wood studs and 6” concrete block veneer with stucco finish.

Riverview Road

Stability Engineering provided full structural design and construction plans for this 36,000 sf new construction single-family residence. Interior features include a bowling alley, movie theater, golf simulator, custom double-curved grand entry stair, 14ft main level ceilings, and two-story grand living room. Exterior features include...

Teton Drive

Stability engineered this two-story modern home with a large, open floor plan, large green roof patio over the garage, and full basement with wine tasting room. The open floor plan was accomplished using 18” open web floor trusses. Steel tube framing and ripped LVL studs were used to brace a 2 story tall wall with large windows on the front of the...

Wellesley Drive

Provided structural engineering for this custom covered rear porch addition. The design included vaulted roof framing with large beams and exposed rafter tails. Foundations were designed for a large double-sided fireplace and concrete walls to support the slab on grade floor with stone tile finish.

West Paces Contemporary

Stability Engineering provided structural design and consultation for new construction of a 10,000 sf modern residence. Structural design features include two-story steel and engineered lumber floor and roof framing over concrete basement with pedestrian entry bridge and in-ground pool and poolhouse built against site retaining walls. Design challenges...